NETGEAR GS728TP100NAS Switch User Manual


 
Configuring System Information
49
ProSafe M5300 Switch
2. Use ADD to create the Pool Configuration.
3. Use APPLY to change the Pool Configuration. Sends the updated configuration to the
switch. Configuration changes take effect immediately.
4. Use DELETE to delete the Pool. This field is not visible to a user with read only permission.
DHCP Pool Options
DHCP options are collections of data with type codes that indicate how the options should be
used. Options can specify information that is required for the DHCP protocol, IP stack
configuration parameters for the client, information allowing the client to rendezvous with
DHCP servers, and so on.
To display the DHCP Pool Options page, click System > Services > DHCP Server> DHCP
Pool Options. If at least one DHCP pool has been created, a screen similar to the following
displays.
To configure DHCP options for an existing pool:
1. Use Pool Name to select the Pool Name.
2. Option Code specifies the Option Code configured for the selected Pool.
DNS Server Addresses Specifies the list of DNS Server Addresses for the pool. The user may specify
up to 8 DNS Server Addresses in order of preference.
NetBIOS Name Server
Addresses
Specifies the list of NetBIOS Name Server Addresses for the pool. The user
may specify up to 8 NetBIOS Name Server Addresses in order of preference.
NetBIOS Node Type Specifies the NetBIOS node type for DHCP clients:
b-node Broadcast
p-node Peer-to-Peer
m-node Mixed
h-node Hybrid
Next Server Address Specifies the Next Server Address for the pool.
Domain Name Specifies the domain name for a DHCP client. Domain Name can be up to 255
characters in length.
Bootfile
Specifies the name of the default boot image for a DHCP client. File Name can
be up to 128 characters in length.
Field Description