Filter
Top Products
Configuring Switching Information
161
ProSafe M5300 Switch
IGMP VLAN Configuration
Use the IGMP Snooping VLAN Configuration page to configure IGMP snooping settings for
VLANs on the system.
To access the IGMP Snooping VLAN Configuration page, click Switching Multicast IGMP
Snooping
IGMP VLAN Configuration.
To configure IGMP snooping settings for VLANs:
1. To enable IGMP snooping on a VLAN, enter the VLAN ID in the appropriate field and
configure the IGMP Snooping values:
• Use Admin Mode to enable or disable IGMP Snooping for the specified VLAN ID.
• Use Fast Leave Admin Mode to enable or disable the IGMP Snooping Fast Leave
Mode for the specified VLAN ID.
• Use Group Membership Interval to set the value for group membership interval of
IGMP Snooping for the specified VLAN ID. Valid range is (Maximum Response Time
+ 1) to 3600 seconds.
• Use Maximum Response Time to set the value for maximum response time of IGMP
Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval -
1). Its value should be greater than group membership interval value.
• Use Multicast Router Expiry Time to set the value for multicast router expiry time of
IGMP Snooping for the specified VLAN ID. Valid range is 0 to 3600 seconds.
2. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
3. To disable IGMP snooping on a VLAN and remove it from the list, select the check box next
to the VLAN ID and click DELETE.
4. To modify IGMP snooping settings for a VLAN, select the check box next to the VLAN ID,
update the desired values, and click APPLY.
5. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.