Filter
Top Products
Configuring System Information
37
ProSafe M5300 Switch
SNTP Global Status
The following table displays SNTP Global Status information.
Field Description
Version Specifies the SNTP Version the client supports.
Supported Mode Specifies the SNTP modes the client supports. Multiple modes may be
supported by a client.
Last Update Time Specifies the local date and time (UTC) the SNTP client last updated the
system clock.
Last Attempt Time Specifies the local date and time (UTC) of the last SNTP request or receipt
of an unsolicited message.
Last Attempt Status Specifies the status of the last SNTP request or unsolicited message for
both unicast and broadcast modes. If no message has been received from
a server, a status of Other is displayed. These values are appropriate for all
operational modes.
• Other - None of the following enumeration values.
• Success - The SNTP operation was successful and the system time
was updated.
• Request Timed Out - A directed SNTP request timed out without
receiving a response from the SNTP server.
• Bad Date Encoded - The time provided by the SNTP server is not
valid.
• Version Not Supported - The SNTP version supported by the server is
not compatible with the version supported by the client.
• Server Unsynchronized - The SNTP server is not synchronized with its
peers. This is indicated via the 'leap indicator' field on the SNTP
message.
• Server Kiss Of Death - The SNTP server indicated that no further
queries were to be sent to this server. This is indicated by a stratum
field equal to 0 in a message received from a server.
Server IP Address Specifies the IP address of the server for the last received valid packet. If
no message has been received from any server, an empty string is shown.
Address Type Specifies the address type of the SNTP Server address for the last
received valid packet.
Server Stratum Specifies the claimed stratum of the server for the last received valid
packet.
Reference Clock Id Specifies the reference clock identifier of the server for the last received
valid packet.
Server Mode Specifies the mode of the server for the last received valid packet.
Unicast Server Max Entries Specifies the maximum number of unicast server entries that can be
configured on this client.