Filter
Top Products
Configuring System Information
75
ProSafe M5300 Switch
To configure the mode of the stack ports:
1. Select the check box associated with the unit and port to configure:
2. From the Configured Stack Mode field, select the operating mode:
• Stack. The port connects to the stack port on another stack member. This is the
default value.
• Ethernet. The port operates as a standard switch port that receives and transmits
network traffic
3. Click Apply to apply the new settings to the system.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. Click Refresh to update the screen with the current information.
The following table describes Stack Port Configuration fields.
Field Description
Unit ID Displays the unit.
Port Displays the stackable interfaces on the given unit.
Slot ID Displays the slot Id in the format unit/slot.
Type Displays the type of stackable interfaces on the given unit.
XFP/SFP+ Adapter Displays the Name of the XFP/SFP+ Adapter.
Running Stack Mode Displays the run-time mode of the stackable interface.