Filter
Top Products
Managing Device Security
422
ProSafe M5300 Switch
DAI Configuration
To display the DAI Configuration page, click Security Control> Dynamic ARP Inspection
DAI Configuration.
To configure global DAI settings:
1. Use Validate Source MAC to choose the DAI Source MAC Validation Mode for the
switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC
validation for the ARP packets will be enabled. The factory default is disable.
2. Use Validate Destination MAC to choose the DAI Destination MAC Validation Mode for the
switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC
validation for the ARP Response packets will be enabled. The factory default is disable.
3. Use Validate IP to choose the DAI IP Validation Mode for the switch by selecting Enable or
Disable radio button. If you select Enable, IP Address validation for the ARP packets will be
enabled. The factory default is disable.
DAI VLAN Configuration
To display the DAI VLAN Configuration page, click Security Control> Dynamic ARP
Inspection
DAI VLAN Configuration.
To configure global DAI VLAN settings:
1. VLAN ID - Select the DAI Capable VLANs for which information has to be displayed or
configured.
2. Use Dynamic ARP Inspection to indicate whether the Dynamic ARP Inspection is enabled
on this VLAN. If this object is set to 'Enable' Dynamic ARP Inspection is enabled. If this
object is set to 'Disable', Dynamic ARP Inspection is disabled.