Filter
Top Products
Maintenance
486
ProSafe M5300 Switch
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.
Note: If you reset the switch to the default configuration, the IP address is
reset to 192.168.1.1, and the DHCP client is enabled. If you lose
network connectivity after you reset the switch to the factory
defaults, see Web Access on page 9.
To access the Factory Defaults page, click Maintenance
Reset Factory Default.
To reset the switch to the factory default settings, select the check box and click the APPLY
button to have all configuration parameters reset to their factory default values. All changes
you have made will be lost, even if you have issued a save. You will be shown a confirmation
screen after you select the button.
Password Reset
Use the Password Reset page to reset all user passwords to defaults.
To access the Password Reset page, click Maintenance
Reset Password Reset.
Select the check box and click the APPLY button to have all user passwords reset to their
factory default values. All changes you have made will be lost, even if you have issued a
save.