Filter
Top Products
Managing Device Security
376
ProSafe M5300 Switch
To configure the certificate download settings for HTTPS sessions:
1. Use File Type to specify the type of file you want to transfer:
• SSL Trusted Root Certificate PEM File - SSL Trusted Root Certificate File (PEM
Encoded)
• SSL Server Certificate PEM File - SSL Server Certificate File (PEM Encoded)
• SSL DH Weak Encryption Parameter PEM File - SSL Diffie-Hellman Weak Encryption
Parameter File (PEM Encoded)
• SSL DH Strong Encryption Parameter PEM File - SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded)
2. Use Transfer Mode to specify the protocol to use to transfer the file:
• TFTP - Trivial File Transfer Protocol
• SFTP - Secure File Transfer Program
• SCP - Secure Copy
3. Use Server Address Type to specify either IPv4 or IPv6 to indicate the format of the
TFTP/SFTP/SCP Server Address field. The factory default is IPv4.
4. Use Server Address to enter the IP address of the server in accordance with the format
indicated by the Server Address Type. The factory default is the IPv4 address 0.0.0.0.
5. Use Remote File Name to enter the name on the TFTP server of the file you want to
download. You may enter up to 32 characters. The factory default is blank.