Filter
Top Products
Routing
314
ProSafe M5300 Switch
IPv6 PIM
From the IPv6 PIM-DM link, you can access the following pages:
• PIM Global Configuration on page 314
• PIM SSM Configuration on page 315
• PIM Interface Configuration on page 316
• PIM Neighbor on page 317
• PIM Candidate RP Configuration on page 318
• PIM BSR Candidate Configuration on page 319
• PIM Static RP Configuration on page 320
PIM Global Configuration
To display the IPv6 PIM Global Configuration page, click Routing IPv6 Multicast PIM
Global Configuration.
To configure global IPv6 PIM settings:
1. Use PIM Protocol Type to select the PIM type to run:
• PIM-SM. Recommended for networks with sparsely-populated multicast receivers.
• PIM-SM. Recommended for networks with densely-populated multicast receivers.
2. Use Admin Mode to set the administrative status of PIM on the router. The default is
disable.
3. Click APPLY to update the switch with the new settings.
4. Click CANCEL to abandon the changes.