Filter
Top Products
Configuring System Information
63
ProSafe M5300 Switch
5. In the Valid Lifetime field, specify the valid lifetime, in seconds, for the delegated prefix. The
values allowed are between 0 to 4294967295.
6. In the Prefer Lifetime field, specify the preferred lifetime, in seconds, for the delegated
prefix. The values allowed are between 0 to 4294967295.
7. Click ADD to add a new delegated prefix for the selected pool.
8. Select the check box associated with a prefix delegation and click DELETE to remove the
delegated prefix.
9. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
10. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.
DHCPv6 Interface Configuration
Use the DHCPv6 Interface Configuration page to configure a DHCPv6 interface.
To display the DHCPv6 Interface Configuration page, click System > Services > DHCPv6
Server> DHCPv6 Interface Configuration. A screen similar to the following displays.
To configure the DHCPv6 Interface Configuration information:
1. Select the check box associated with each interface to configure, or select the check
box in the heading row to apply the same configuration to all interfaces.
2. In the Admin Mode field, specify the DHCPv6 mode to configure server functionality on the
selected interface(s). DHCPv6 server and DHCPv6 relay functions are mutually exclusive.
3. In the Pool Name field, specify the DHCPv6 pool containing stateless and/or prefix
delegation parameters.
4. (Optional) In the Rapid Commit field, select Enable to allow abbreviated exchange between
the client and server.