Filter
Top Products
Routing
319
ProSafe M5300 Switch
PIM BSR Candidate Configuration
To display the IPv6 PIM-SM BSR Candidate Configuration page, click Routing IPv6
Multicast PIM-SM BSR Candidate Configuration.
To configure BSR candidate settings for IPv6 PIM-SM:
1. Use Interface to select the interface for which data is to be configured.
2. Use Priority to enter the priority of C-BSR.
3. Use Hash Mask Length to enter the C-BSR hash mask length to be advertised in bootstrap
messages. This hash mask length will be used in the hash algorithm for selecting the RP for
a particular group. The valid values are from 0 to 128. Default value is 126.
Field Description
IP Address Displays the IP address of the Elected BSR.
Next bootstrap Message Time (in hours, minutes, and seconds) in which the next bootstrap
message is due from this BSR.
Next Candidate RP Advertisement Time (in hours, minutes, and seconds) in which the next candidate
RP advertisement will be sent.