Filter
Top Products
Managing Device Security
409
ProSafe M5300 Switch
2. In the Secondary VLAN field, specify the VLAN ID of the VLAN to associate with the
selected primary VLAN.
3. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.
4. Click CANCEL to cancel the configuration on the screen.
Field Description
Isolated VLAN Displays the isolated VLAN associated with the primary VLAN.
Community VLAN Displays the list of community VLAN(s) associated with the primary VLAN.
Private VLAN Port Mode Configuration
Use tis page to configure the port mode for the ports that belong to a private VLAN.
To display the Private VLAN Port Mode Configuration page, click the Security
Traffic
Control
Private VLAN > Private VLAN Port Mode Configuration.
To configure the port mode for ports:
1. Select the check box associated with each Interface to configure, or select the check box in
the header row to apply the same settings to all interfaces.
2. From the Port VLAN Mode menu, select the mode to apply to the selected port(s). The
modes are as follows:
• General: The port is in general mode and is not a member of the private VLAN.
• Promiscuous: The port belongs to a primary VLAN and can communicate with all
interfaces in the private VLAN, including other promiscuous ports, community ports
and isolated ports.
• Host: The port belongs to a secondary VLAN and depending upon the type of
secondary VLAN can either communicate with other ports in the same community (if
the secondary VLAN is community VLAN) and with the promiscuous ports or is able
to communicate only with the promiscuous ports (if the secondary VLAN is isolated
VLAN).
3. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.