Filter
Top Products
Routing
323
ProSafe M5300 Switch
8. Use Startup Query Count to specify the value that indicates the configured number of
Queries sent out on startup, separated by the Startup Query Interval.
9. Use Last Member Query Interval to enter the last member query interval in milliseconds.
This is the maximum response time to be inserted into group-specific queries sent in
response to leave group messages, and is also the amount of time between group-specific
query messages. Valid values are from 0 to 65535. The default value is 1000 milliseconds.
10. Use Last Member Query Count to enter the number of queries to be sent on receiving a
leave group report. Valid values are from 1 to 20. The default value is 2.
Field Description
Operational Mode The operational status of MLD on the Interface.
MLD Routing Interface Statistics
To display the MLD Routing Interface Statistics page, click Routing IPv6 Multicast MLD
Routing Interface Statistics.
Field Description
Interface The interface for which data is to be displayed.
Querier Status This value indicates whether the interface is a MLD querier or non-querier on
the subnet it is associated with.
Querier IP The address of the MLD querier on the IP subnet to which the selected
interface is attached.
Querier Up Time The time in seconds since the MLD interface querier was last changed.
Querier Expiry Time The time in seconds remaining before the other querier present timer expires.
If the local system is the querier, this will be zero.
Wrong Version Queries
Received
Indicates the number of queries received whose MLD version does not match
the MLD version of the interface.
Number of Joins Received The number of times a group membership has been added on this interface.
Number of Groups The current number of membership entries for the selected interface in the
cache table.
Click REFRESH to refresh the data on the screen with the latest MLD routing interface
statistics.