Filter
Top Products
Managing Device Security
432
ProSafe M5300 Switch
Captive Portal User Configuration
When you click Add from the CP User Configuration page, the screen refreshes, and you can
add a new user to the Local User database.
To display the Captive Portal User Configuration page, click Security Control> Captive
Portal
CP User Configuration.
1. User ID identifies the name of the user.
2. Use User Name to enter the name of the user. Name can contain 1 to 31 alphanumeric
characters. User names once created cannot be changed/modified.
3. Set Edit Password to “Enable” only when you want to change the password. The default
value is “Disable”.
4. Use Password to enter a password for the user. The password length can be from 8 to 64
characters.
5. Use Confirm Password to enter the password for the user again.
6. Use Group to assign the user to at least one User Group. To assign a user to more than
one group, press the Ctrl key and click each group. New users are assigned to the 1-Default
user group by default.
7. Use Session Timeout to enter the number of seconds a user is permitted to remain
connected to the network. Once the Session Timeout value is reached, the user is logged
out automatically. A value of 0 means that the user does not have a Session Timeout limit.
The valid range is 0 to 86400 seconds and the default value is 0.
8. Use Idle Timeout to enable Logout once idle time-out is reached (seconds). If the attribute
is 0 or not present then use the value configured for the captive portal.
9. Use Max Bandwidth Down to specify the maximum rate (Rate in bits per seconds) at which
a client can receive data from the network. 0 indicates use global configuration (Range: 0 –
536870911 bps.)