Filter
Top Products
Configuring Switching Information
132
ProSafe M5300 Switch
6. Click APPLY to update the switch with the changes.
7. Click CANCEL to abandon the changes.
Field Description
Operational State This is the operational status of the voice vlan on the given interface. To be
enabled, Voice VLAN must be globally enabled and enabled on the interface.
Additionally, the interface must be up and have a link.
GARP Switch Configuration
The switch supports Generic Attribute Registration Protocol (GARP), GARP VLAN
Registration Protocol (GVRP), and GARP Multicast Registration Protocol (GMRP). GVRP
relies on the services provided by GARP to provide IEEE 802.1Q-compliant VLAN pruning
and dynamic VLAN creation on 802.1Q trunk ports. GMRP uses GARP services to help
control the flooding of multicast traffic by keeping track of group membership information.
Note: It can take up to 10 seconds for GARP configuration changes to take
effect.
To display the GARP Switch Configuration page, click Switching
VLAN Advanced
GARP Switch Configuration.
To configure the global GARP settings:
1. Use GVRP Mode to choose the GARP VLAN Registration Protocol administrative mode
for the switch by selecting enable or disable from the radio button. When GARP is
enabled, switches can dynamically register (and de-register) VLAN membership
information with other switches attached to the same segment. Information about the
active VLANs is propagated across all networking switches in the bridged LAN that
support GVRP.The factory default is disable.
2. Use GMRP Mode to choose the GARP Multicast Registration Protocol administrative mode
for the switch by selecting enable or disable from the radio button. GMRP is similar to IGMP
snooping in its purpose, but IGMP snooping is more widely used. GMRP must be running on
both the host and the switch to function properly.The factory default is disable.
3. Click APPLY to update the switch with the changes.
4. Click CANCEL to abandon the changes.