Filter
Top Products
Routing
320
ProSafe M5300 Switch
PIM Static RP Configuration
This page is used to statically configure the RP address for one or more multicast groups.
To display the IPv6 PIM Static RP Configuration page, click Routing IPv6 Multicast PIM
Static RP Configuration.
To configure static RP settings for IPv6 PIM-SM:
1. Use RP Address to specify the IP Address of the RP to be created or deleted.
2. Use Group Address to specify the Group Address of the RP to be created or deleted.
3. Use Prefix Length to specify the Group IPv6 Prefix Length of the RP to be created or
deleted.
4. Use Override to indicate that if there is a conflict, the RP configured with this option prevails
over the RP learned by BSR.
5. Click ADD to add a new static RP address for one or more multicast groups.
6. Click DELETE to delete the RP address selected.