Filter
Top Products
Configuring System Information
41
ProSafe M5300 Switch
7. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
8. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.
DNS Server Configuration
The following table displays DNS Server Configuration information.
Field Description
Serial No The sequence number of the DNS server.
Preference Shows the preference of the DNS Server. The
preference is determined by the order they were
entered.
Host Configuration
Use this page to manually map host names to IP addresses or to view dynamic DNS
mappings.
To access this page, click System Management DNS Host Configuration.
To add a static entry to the local DNS table:
1. Specify the static host name to add. Its length can not exceed 255 characters and it is a
mandatory field for the user.
2. Specify the IP address in standard IPv4 dot notation to associate with the hostname.
3. Click ADD. The entry appears in the list below.
4. To remove an entry from the static DNS table, select the check box next to the entry and
click DELETE.
5. To change the hostname or IP address in an entry, select the check box next to the entry
and enter the new information in the appropriate field, and then click APPLY.
6. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.