Configuring Switching Information
125
ProSafe M5300 Switch
Port PVID Configuration
The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface.
There are certain requirements for a PVID:
• All ports must have a defined PVID.
• If no other value is specified, the default VLAN PVID is used.
• If you want to change the port’s default PVID, you must first create a VLAN that includes
the port as a member.
• Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port.
To access the Port PVID Configuration page, click Switching
VLAN Advanced Port
PVID Configuration.
To configure PVID information:
1. Click ALL to display information for all Physical ports and LAGs.
2. Select the check box next to the interfaces to configure. You can select multiple interfaces to
apply the same setting to the selected interfaces. Select the check box in the heading row to
apply the same settings to all interfaces.
3. Use Interface to select the interface you want to configure.
4. Use Configured PVID to specify the VLAN ID you want assigned to untagged or priority
tagged frames received on this port. The factory default is 1. The Current PVID field shows
the PVID currently in use on the interface.
5. Use Acceptable Frame Types to specify the types of frames that may be received on this
port. The options are 'VLAN only' and 'Admit All':
• When set to VLAN only, untagged frames or priority tagged frames received on this
port are discarded.
• When set to Admit All, untagged frames or priority tagged frames received on this
port are accepted and assigned the value of the Port VLAN ID for this port. With either
option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.