Filter
Top Products
Routing
194
ProSafe M5300 Switch
5. Use ICMP Rate Limit Burst Size to control the ICMP error packets by specifying the
number of ICMP error packets that are allowed per burst interval. By default, burst size is
100 packets. When burst interval is 0 then configuring this field is not a valid operation. Valid
Burst Size must be in the range 1 to 200.
Field Description
Default Time to Live The default value inserted into the Time-To-Live field of the IP header
of datagrams originated by the switch, if a TTL value is not supplied by
the transport layer protocol.
Maximum Next Hops The maximum number of hops supported by the switch. This is a
compile-time constant.
Statistics
The statistics reported on this screen are as specified in RFC 1213.
To display the Statistics page, click Routing
IP Basic Statistics. The following screen
shows some, but not all of the IP statistics available.