Filter
Top Products
Routing
318
ProSafe M5300 Switch
PIM Candidate RP Configuration
To display the IPv6 PIM Candidate RP Configuration page, click Routing IPv6 Multicast
PIM Candidate RP Configuration.
To configure candidate RP settings for IPv6 PIM-SM:
1. Use Interface to select the interface for which data is to be displayed.
2. Use Group Address to specify the group IPv6 address prefix transmitted in
Candidate-RP-Advertisements.
3. Use Prefix Length to specify the group IPv6 Prefix Length transmitted in
Candidate-RP-Advertisements.
4. Click ADD to add a new Candidate RP Address for the PIM-SM router.
5. Click DELETE to delete an extant Candidate RP Address for the PIM-SM router.