Filter
Top Products
Configuring Switching Information
162
ProSafe M5300 Switch
Multicast Router Configuration
This page configures the interface as the one the multicast router is attached to. All IGMP
packets snooped by the switch will be forwarded to the multicast router reachable from this
interface. The configuration is not needed most of the time since the switch will automatically
detect the presence of multicast router and forward IGMP packet accordingly. It is only
needed when you want to make sure the multicast router always receives IGMP packets from
the switch in a complex network.
To access the Multicast Router Configuration page, click Switching
Multicast IGMP
Snooping
Multicast Router Configuration.
1. Select the check box associated with each interface you want to configure. Select the
check box in the heading row to apply the same settings to all interfaces.
2. Use Multicast Router to enable or disable Multicast Router on the selected interfaces.
3. Click APPLY to update the switch with the changes.
4. Click CANCEL to abandon the changes.