Filter
Top Products
Configuring Switching Information
178
ProSafe M5300 Switch
1. Use Search By to search for MAC Addresses by MAC Address, VLAN ID, and port:
• Searched by MAC Address - Select MAC Address from pull-down menu, enter the 6
byte hexadecimal MAC Address in two-digit groups separated by colons, for example
01:23:45:67:89:AB. Then click on the “Go” button. If the address exists, that entry will
be displayed as the first entry followed by the remaining (greater) mac addresses. An
exact match is required.
• Searched by VLAN ID - Select VLAN ID from pull-down menu, enter the VLAN ID, for
example 100. Then click on the “Go” button. If the address exists, the entry will be
displayed as the first entry followed by the remaining (greater) mac addresses.
• Searched by Port - Select Port from pull-down menu, enter the port ID in
Unit/Slot/Port, for example 2/1/1. Then click on the “Go” button. If the address exists,
the entry will be displayed as the first entry followed by the remaining (greater) mac
addresses.
2. Click Go to initiate the search.
Field Description
Total MAC Address Displaying the number of total MAC addresses
learned or configured.
MAC Address A unicast MAC address for which the switch has
forwarding and/or filtering information. The format is
a 6 byte MAC Address that is separated by colons,
for example 01:23:45:67:89:AB.
VLAN ID The VLAN ID associated with the MAC Address.
Port The port upon which this address was learned.
Status The status of this entry. The meanings of the values
are:
• Static: the value of the corresponding instance
was added by the system or a user and cannot
be relearned.
• Learned: the value of the corresponding instance
was learned, and is being used.
• Management: the value of the corresponding
instance is also the value of an existing instance
of dot1dStaticAddress.