Filter
Top Products
Field Description
VLAN ID Displays the VLAN ID for the interface.
Link State The state of the specified interface is either Active or Inactive. An interface is
considered active if it the link is up and it is in forwarding state.
OSPF Admin Mode Displays OSPF admin mode of the interface. The default value is disable.
Routing
200
ProSafe M5300 Switch
Secondary IP Address
To display the Secondary IP Address page, click Routing IP Advanced Secondary IP.
To configure a secondary IP address on an interface enabled for routing:
1. Use Interface to select the interface for which data is to be displayed or configured.
2. Use Secondary IP Address to add a secondary IP address to the selected interface.
3. Use Secondary IP Subnet Mask to enter the subnet mask for the interface. This is also
referred to as the subnet/network mask, and defines the portion of the interface's IP Address
that is used to identify the attached network. This value is read only once configured.
4. Click ADD to add a Secondary IP Address for the selected interface.
5. Click DELETE to delete the Secondary IP Address from the selected interface.
Field Description
VLAN ID The VLAN ID associated with the displayed or configured interface.
Primary IP Address The Primary IP Address for the Interface.