Filter
Top Products
Routing
277
ProSafe M5300 Switch
Route Redistribution
This screen can be used to configure the OSPFv3 Route Redistribution parameters. The
allowable range for each field is displayed next to it. If an invalid value is entered in one or
multiple fields, an alert message will be displayed with the list of all the valid values.
To display the Route Redistribution page, click Routing OSPFv3 Advanced Route
Redistribution.
1. Use Source to select those Source Protocols that have already been configured for
redistribution by OSPFv3. The valid values are 'Static' and 'Connected'.
2. Use Redistribute Option to enable or disable the redistribution for the selected source
protocol.
3. Use Metric to set the metric value to be used as the metric of redistributed routes. This field
displays the metric if the source was pre-configured and can be modified. The valid values
are 0 to 16777214.
4. Use Metric Type to set the OSPFv3 metric type of redistributed routes.
5. Use Tag to set the tag field in routes redistributed. This field displays the tag if the source
was pre-configured, else a default tag value of 0 is displayed. The valid values are 0 to
4294967295.