Filter
Top Products
Configuring System Information
95
ProSafe M5300 Switch
LLDP Interface Configuration
To display this page, click System LLDP Interface Configuration. A screen similar to the
following displays.
1. Use Port to specify the list of ports on which LLDP - 802.1AB can be configured.
2. Link Status indicates whether the Link is up or down.
3. Use Transmit to specify the LLDP - 802.1AB transmit mode for the selected interface.
4. Use Receive to specify the LLDP - 802.1AB receive mode for the selected interface.
5. Use Notify to specify the LLDP - 802.1AB notification mode for the selected interface.
6. Use Transmit Management Information to specify whether management address is
transmitted in LLDP frames for the selected interface.
7. Optional TLV(s):
• Use System Name to include system name TLV in LLDP frames.
• Use System Description to include system description TLV in LLDP frames.
• Use System Capabilities to include system capability TLV in LLDP frames.
• Use Port Description to include port description TLV in LLDP frames.