Filter
Top Products
Configuring System Information
43
ProSafe M5300 Switch
The following table displays Summary information, which describes the maximum resources
each template supports for various features..
Field Description
SDM Template Identifies the Template. The possible values are:
• Dual IPv4 and IPv6
• IPv4-routing Default
• IPv4 Data Center
ARP Entries The maximum number of entries in the IPv4 Address Resolution Protocol
(ARP) cache for routing interfaces.
IPv4 Unicast Routes The maximum number of IPv4 unicast forwarding table entries.
IPv6 NDP Entries The maximum number of IPv6 Neighbor Discovery Protocol (NDP)
cache entries.
IPv6 Unicast Routes The maximum number of IPv6 unicast forwarding table entries.
ECMP Next Hops The maximum number of next hops that can be installed in the IPv4 and
IPv6 unicast forwarding tables.
IPv4 Multicast Routes The maximum number of IPv4 multicast forwarding table entries.
IPv6 Multicast Routes The maximum number of IPv6 multicast forwarding table entries.
License
From the License link under the System tab, you can view information about the switch
license.
Note: The Licence feature is not available on all switch models.
The License link provides access to the following pages:
• License Key on page 43
• License Features on page 44
License Key
Use the License Key page to view information about the license(s) on the device. Some
features might require a special license in order to be active. If a license is not active, the
feature associated with the license is not available and cannot be configured.
To display the License Key page, click System > License > License Key. A screen similar to
the following displays.