Filter
Top Products
Managing Device Security
403
ProSafe M5300 Switch
Static MAC Address
Use this page to add and remove the MAC addresses of hosts that are allowed to send traffic
to specific interfaces on the device. The number of MAC addresses you can associate with
each interface is determined by the maximum static MAC addresses allowed on a given
interface.
To display the Static MAC Address page, click Security
Traffic Control> Port Security
Static MAC Address.
To configure static MAC address-to-interface associations:
1. When adding a static MAC address entry, use the Interface menu to select the interface to
associate with the permitted MAC address.Interface - Select the physical interface for
which you want to display data.
2. Static MAC Address - Accepts user input for the MAC address to be deleted.
3. Use VLAN ID to select the VLAN ID corresponding to the MAC address being added.
4. Click ADD to add a new static MAC address to the switch.
5. Click DELETE to delete a existing static MAC address from the switch.