Filter
Top Products
Managing Device Security
408
ProSafe M5300 Switch
To configure the private VLAN type:
1. Select the check box associated with each VLAN to configure. To apply the same
settings to all VLANs, select the check box in the header row.
2. Use the Private VLAN Type menu to identify a group of protected ports that can be
combined into a logical group. The options are as follows:
• Primary: Sets Private VLAN as Primary Type that forwards the traffic from the
promiscuous ports to isolated ports, community ports and other promiscuous ports in
the same private VLAN.
• Isolated: Sets Private VLAN as Isolated Type that carries traffic from isolated ports to
promiscuous ports.
• Community: Sets Private VLAN as Isolated Type that forwards traffic between ports
which belong to the same community and to the promiscuous ports.
• Unconfigured: Sets the VLAN as non Private VLAN.
3. Click APPLY to send the updated configuration to the switch.
4. Click CANCEL to cancel the configuration on the screen.
Private VLAN Association Configuration
Use this page to configure the association between the primary private VLAN and secondary
VLANs.
To display the Private VLAN Association Configuration page, click the Security Traffic
Control
Private VLAN > Private VLAN Association Configuration.
To configure an association between a primary and secondary VLAN:
1. From the Primary VLAN field, select the ID of the primary private VLAN to configure.