NETGEAR GS728TP100NAS Switch User Manual


 
Configuring Switching Information
128
ProSafe M5300 Switch
4. Use VLAN ID to select the VLAN ID. It can be any number in the range of 1 to 4093. All the
ports in the group will assign this VLAN ID to untagged packets received for the protocols
you included in this group.
5. Click ADD to add a new Protocol Based VLAN group to the switch.
6. Click DELETE to remove the Protocol Based VLAN group identified by the value in the
Group ID field.
Field Description
Ports Identifies all the member ports which belong to the group.
Protocol Based VLAN Group Membership
To display the Protocol Based VLAN Group Membership page, click Switching VLAN
Advanced
Protocol Based VLAN Group Membership. In the following screen, the port
area for Unit 1 has been expanded to show that ports 7–9 are members of the selected
group.
To configure member ports for a protocol-based VLAN group:
1. Use Group ID to select the protocol-based VLAN Group ID for which you want to
display or configure data.
2. Use Port List to add the ports you selected to this Protocol Based VLAN Group. Note that a
given interface can only belong to one group for a given protocol. For example, if you have
already added a port to a group for IP, you cannot add it to another group that also includes
IP, although you could add it to a new group for IPX.
3. Click APPLY to update the switch with the changes.
Field Description
Group Name This field identifies the name for the protocol-based VLAN you selected. It can be
up to 32 alphanumeric characters long, including blanks.
Current Members This button can be click to show the current numbers in the selected protocol
based VLAN Group.