Filter
Top Products
Managing Device Security
391
ProSafe M5300 Switch
• auto - The authenticator PAE sets the controlled port mode to reflect the outcome
of the authentication exchanges between the supplicant, authenticator, and the
authentication server.
• mac based - The authenticator PAE sets the controlled port mode to reflect the
outcome of the authentication exchanges between the supplicant, authenticator,
and the authentication server on a per supplicant basis.
• Quiet Period - This input field allows the user to configure the quiet period for the
selected port. This command sets the value, in seconds, of the timer used by the
authenticator state machine on this port to define periods of time in which it will not
attempt to acquire a supplicant. The quiet period is the period for which the
authenticator does not attempt to acquire a supplicant after a failed authentication
exchange with the supplicant. The quiet period must be a number in the range of 0
and 65535. A quiet period value of 0 means that the authenticator state machine will
never acquire a supplicant. The default value is 60. Changing the value will not
change the configuration until the APPLY button is pressed.
• Transmit Period - This input field allows the user to configure the transmit period for
the selected port. The transmit period is the value, in seconds, of the timer used by
the authenticator state machine on the specified port to determine when to send an
EAPOL EAP Request/Identity frame to the supplicant. The transmit period must be a
number in the range of 1 and 65535. The default value is 30. Changing the value will
not change the configuration until the APPLY button is pressed.
• Guest VLAN Id - This field allows the user to configure Guest VLAN ID on the
interface. The valid range is 0-3965.The default value is 0. Changing the value will not
change the configuration until the APPLY button is pressed. Enter 0 to clear the
Guest VLAN ID on the interface.
• Guest VLAN Period - This input field allows the user to enter the guest VLAN period
for the selected port. The guest VLAN period is the value, in seconds, of the timer
used by the Guest VLAN Authentication. The guest VLAN time-out must be a value in
the range of 1 and 300. The default value is 90. Changing the value will not change
the configuration until the APPLY button is pressed.
• Unauthenticated VLAN ID - This input field allows the user to enter the
Unauthenticated VLAN ID for the selected port. The valid range is 0-3965.The default
value is 0. Changing the value will not change the configuration until the Submit
button is pressed. Enter 0 to clear the Unauthenticated VLAN ID on the interface.
• Supplicant Timeout - This input field allows the user to enter the supplicant time-out
for the selected port. The supplicant time-out is the value, in seconds, of the timer
used by the authenticator state machine on this port to time-out the supplicant. The
supplicant time-out must be a value in the range of 1 and 65535. The default value is
30. Changing the value will not change the configuration until the APPLY button is
pressed.
• Server Timeout - This input field allows the user to enter the server time-out for the
selected port. The server time-out is the value, in seconds, of the timer used by the
authenticator on this port to time-out the authentication server. The server time-out
must be a value in the range of 1 and 65535. The default value is 30. Changing the
value will not change the configuration until the APPLY button is pressed.