Filter
Top Products
Routing
326
ProSafe M5300 Switch
MLD Proxy Interface Configuration
To display the MLD Proxy Interface Configuration page, click Routing IPv6 Multicast MLD
Proxy Interface Configuration.
To configure MLD proxy interface settings:
1. Use Interface to select the interface to be configured.
2. Use Admin Mode to set the administrative status of MLD Proxy on the selected interface.
The default is disable. Routing, MLD and Multicast global admin modes should be enabled
to enable MLD Proxy interface mode.
3. Use Version to enter the version of MLD you want to configure on the selected interface.
Valid values are 1 to 2 and the default value is 3. This field is configurable only when MLD
Proxy interface mode is enabled.
4. Use Unsolicited Report Interval to enter the unsolicited time interval value in seconds. The
Unsolicited Report Interval is the time between repetitions of a host's initial report of
membership in a group. Valid values are from 1 to 260. The default value is 1.
Field Description
IPv6 Prefix The IPv6 address of the MLD Proxy interface.
Prefix Length The prefix length for the IPv6 address of the MLD Proxy interface.
Operational Mode The operational state of MLD Proxy interface.
Number of Groups The current number of multicast group entries for the MLD Proxy interface
in the cache table.
Version 1 Querier Timeout The older MLD version 1 querier timeout value in seconds. The Older
Version Querier Interval is the time-out for transitioning a host back to
MLDv2 mode once an older version query is heard. When an older version
query is received, hosts set their Older Version Querier Present Timer to
Older Version Querier Interval.
Proxy Start Frequency The number of times the proxy was brought up.