Renesas H8S/2111B Network Card User Manual


 
Rev. 1.00, 05/04, page 198 of 544
TCSR_Y
Bit Bit Name
Initial
Value R/W Description
7 CMFB 0 R/(W)*
1
Compare-Match Flag B
[Setting condition]
When the values of TCNT_Y and TCORB_Y match
[Clearing condition]
Read CMFB when CMFB = 1, then write 0 in CMFB
6 CMFA 0 R/(W)*
1
Compare-Match Flag A
[Setting condition]
When the values of TCNT_Y and TCORA_Y match
[Clearing condition]
Read CMFA when CMFA = 1, then write 0 in CMFA
5 OVF 0 R/(W)*
1
Timer Overflow Flag
[Setting condition]
When TCNT_Y overflows from H'FF to H'00
[Clearing condition]
Read OVF when OVF = 1, then write 0 in OVF
4 ICIE 0 R/W Input Capture Interrupt Enable
Enables or disables the ICF interrupt request (ICIX)
when the ICF bit in TCSR_X is set to 1.
0: ICF interrupt request (ICIX) is disabled
1: ICF interrupt request (ICIX) is enabled
3
2
OS3
OS2
0
0
R/W
R/W
Output Select 3, 2
These bits specify how the TMOY pin*
2
output level is to
be changed by compare-match B of TCORB_Y and
TCNT_Y.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)
1
0
OS1
OS0
0
0
R/W
R/W
Output Select 1, 0
These bits specify how the TMOY pin*
2
output level is to
be changed by compare-match A of TCORA_Y and
TCNT_Y.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)
Notes: 1. Only 0 can be written, for flag clearing.
2. The program development tool (emulator) does not support this pin.