Renesas H8S/2111B Network Card User Manual


 
Rev. 1.00, 05/04, page 423 of 544
16.5 Interrupt Sources
The A/D converter generates an A/D conversion end interrupt (ADI) at the end of A/D conversion.
Setting the ADIE bit to 1 enables ADI interrupt requests while the ADF bit in ADCSR is set to 1
after A/D conversion is completed.
16.6 A/D Conversion Accuracy Definitions
This LSI's A/D conversion accuracy definitions are given below.
Resolution
The number of A/D converter digital output codes
Quantization error
The deviation inherent in the A/D converter, given by 1/2 LSB (see figure 16.5).
Offset error
The deviation of the analog input voltage value from the ideal A/D conversion characteristic
when the digital output changes from the minimum voltage value B'0000000000 (H'000) to
B'0000000001 (H'001) (see figure 16.6).
Full-scale error
The deviation of the analog input voltage value from the ideal A/D conversion characteristic
when the digital output changes from B'1111111110 (H'3FE) to B'1111111111 (H'3FF) (see
figure 16.6).
Nonlinearity error
The error with respect to the ideal A/D conversion characteristics between the zero voltage and
the full-scale voltage. Does not include the offset error, full-scale error, or quantization error
(see figure 16.6).
Absolute accuracy
The deviation between the digital value and the analog input value. Includes the offset error,
full-scale error, quantization error, and nonlinearity error.