Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
125
show vlan
member of the VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which to display
a summary of settings.
vlanid <vidlist> - Users may alternately choose the VLAN to be
displayed by entering the VLAN ID.
ports <portlist> - Users may also view VLANs by designated port.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
DGS-3600:4#show vlan
Command: show vlan
VID : 1 VLAN Name : default
VLAN Type : Static Advertisement : Enabled
Member ports : 1-27
Static ports : 1-27
Current Tagged Ports :
Current Untagged Ports : 1-27
Static Tagged Ports :
Static Untagged Ports : 1-27
Forbidden Ports:
Total Entries : 1
DGS-3600:4#
show gvrp
Purpose Used to display the GVRP status for a port list on the Switch.
Syntax
show gvrp {<portlist>}
Description This command displays the GVRP status for a port list on the
Switch.
Parameters
<portlist> − Specifies a range of ports for which the GVRP status
is to be displayed. The port list is specified by listing the lowest
switch number and the beginning port number on that switch,
separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are
separated by a dash. For example, 1:3 specifies switch number
1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies
all of the ports between switch 1, port 3 and switch 2, port 4 − in
numerical order. Non-contiguous portlist entries are separated by
a comma. (ex: 1:1-1:3,1:7-1:9)
Restrictions None.
Example usage:
To display GVRP port status: