Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
126
DGS-3600:4#show gvrp
Command: show gvrp
Global GVRP : Disabled
Port PVID GVRP Ingress Checking Acceptable Frame Type
------ ---- -------- ---------------- ---------------------------
1:1 1 Disabled Enabled All Frames
1:2 1 Disabled Enabled All Frames
1:3 1 Disabled Enabled All Frames
1:4 1 Disabled Enabled All Frames
1:5 1 Disabled Enabled All Frames
1:6 1 Disabled Enabled All Frames
1:7 1 Disabled Enabled All Frames
1:8 1 Disabled Enabled All Frames
1:9 1 Disabled Enabled All Frames
1:10 1 Disabled Enabled All Frames
1:11 1 Disabled Enabled All Frames
1:12 1 Disabled Enabled All Frames
1:13 1 Disabled Enabled All Frames
1:14 1 Disabled Enabled All Frames
1:15 1 Disabled Enabled All Frames
1:16 1 Disabled Enabled All Frames
1:17 1 Disabled Enabled All Frames
1:18 1 Disabled Enabled All Frames
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
enable double_vlan
Purpose Used to enable the Double VLAN feature on the Switch.
Syntax
enable double_vlan
Description This command, along with the disable double_vlan command,
enables and disables the Double Tag VLAN. When Double VLANs
are enabled, the system configurations for VLANs will return to the
default setting, except stacking information, IP address, log, user
accounts and banner setting, in order to enable the Double VLAN
mode. In the Double VLAN mode, normal VLANs and GVRP
functions are disabled. The Double VLAN default setting is disabled.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the Double VLAN feature on the Switch, thus disabling normal VLANs and GVRP.
DGS-3600:4#enable double_vlan
Command: enable double_vlan
Current Double VLAN mode : Disabled
Enable Double VLAN need to reset system config. Are you sure ?(y/n)y
Success.
DGS-3600:4#