Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
297
To delete an entry domain name dns1, IP address 10.43.21.12 from DNS static table.
DGS-3600:4#config dnsr delete static dns1 10.43.21.12
Command: config dnsr delete static dns1 10.43.21.12
Success.
DGS-3600:4#
enable dnsr
Purpose Used to enable DNS relay.
Syntax
enable dnsr {[cache | static]}
Description This command is used, in combination with the disable dnsr command
below, to enable and disable DNS Relay on the Switch.
Parameters cache - This parameter will allow the user to enable the cache lookup for
the DNS rely on the Switch.
static - This parameter will allow the user to enable the static table
lookup for the DNS rely on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable status of DNS relay:
DGS-3600:4#enable dnsr
Command: enable dnsr
Success.
DGS-3600:4#
Example usage:
To enable cache lookup for DNS relay.
DGS-3600:4#enable dnsr cache
Command: enable dnsr cache
Success.
DGS-3600:4#
Example usage:
To enable static table lookup for DNS relay.
DGS-3600:4#enable dnsr static
Command: enable dnsr static
Success.
DGS-3600:4#