xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
68
DGS-3600:4#disable autoconfig
Command: disable autoconfig
Success.
DGS-3600:4#
show autoconfig
Purpose Used to display the current autoconfig status of the Switch.
Syntax
show autoconfig
Description This will list the current status of the autoconfiguration function.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To upload an autoconfiguration-:
DGS-3600:4#show autoconfig
Command: show autoconfig
Autoconfig State: Disabled.
DGS-3600:4#