Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
81
config system_severity
• Critical – Events classified as critical are fatal exceptions occurring on
the Switch, such as hardware failures or spoofing attacks.
Parameters Choose one of the following to identify where severity messages are to be
sent.
• trap – Entering this parameter will define which events occurring on
the Switch will be sent to a SNMP agent for analysis.
• log – Entering this parameter will define which events occurring on
the Switch will be sent to the Switch’s log for analysis.
• all – Entering this parameter will define which events occurring on
the Switch will be sent to a SNMP agent and the Switch’s log for
analysis.
Choose one of the following to identify what level of severity warnings are to
be sent to the destination entered above.
• critical – Entering this parameter along with the proper destination,
stated above, will instruct the Switch to send only critical events to
the Switch’s log or SNMP agent.
• warning – Entering this parameter along with the proper destination,
stated above, will instruct the Switch to send critical and warning
events to the Switch’s log or SNMP agent.
• information – Entering this parameter along with the proper
destination, stated above, will instruct the switch to send
informational, warning and critical events to the Switch’s log or
SNMP agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the system severity settings for critical traps only:
DGS-3600:4#config system_severity trap critical
Command: config system_severity trap critical
Success.
DGS-3600:4#
show system_severity
Purpose To display the current severity settings set on the Switch.
Syntax
show system_severity
Description This command is used to view the severity settings that have been
implemented on the Switch using the config system_severity
command.
Parameters None.
Restrictions None.
Example usage:
To view the system severity settings currently implemented on the Switch: