Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
238
DGS-3600:4#config access_profile profile_id 4 add access_id 1 ipv6
class 1 flowlabel 0xABCD port 4 deny
Command: config access_profile profile_id 4 add access_id 1 ipv6
class 1 flowlabel 0xABCD port 4 deny
Success.
DGS-3600:4#
delete access_profile
Purpose Used to delete a previously created access profile.
Syntax
delete access_profile [profile_id <value 1-14> | all]
Description The delete access_profile command is used to delete a previously
created access profile on the Switch.
Parameters
profile_id <value 1-14> − Enter an integer between 1 and 14 that is
used to identify the access profile that will be deleted with this
command. This value is assigned to the access profile when it is
created with the create access_profile command.
all – Use this parameter to delete all created access profiles on the
Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
DGS-3400:4# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DGS-3400:4#
show access_profile
Purpose Used to display the currently configured access profiles on the Switch.
Syntax
show access_profile {profile_id <value 1-14>}
Description
The show access_profile command is used to display the currently configured
access profiles.
Parameters
profile_id <value 1-14> − Enter an integer between 1 and 14 that is used to
identify the access profile that will be viewed with this command. This value is
assigned to the access profile when it is created with the create access_profile
command.
Entering this command without the profile_id parameter will command the
Switch to display all access profile entries.
Restrictions None.
Example usage:
To display all of the currently configured access profiles on the Switch:
DGS-3600:4#show access_profile
Command: show access_profile
Total Unused Rule Entries : 1791
Total Used Rule Entries : 1