Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
187
Example usage:
To show a single IP destination of the DHCP relay configuration:
DGS-3600:4#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface Server 1 Server 2 Server 3 Server 4
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DGS-3600:4#
enable dhcp_relay
Purpose Used to enable the DHCP/BOOTP relay function on the Switch.
Syntax
enable dhcp_relay
Description This command is used to enable the DHCP/BOOTP relay function on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable DHCP relay:
DGS-3600:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3600:4#
disable dhcp_relay
Purpose Used to disable the DHCP/BOOTP relay function on the Switch.
Syntax
disable dhcp_relay
Description This command is used to disable the DHCP/BOOTP relay function on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable DHCP relay:
DGS-3600:4#disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3600:4#