Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
10
create account
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To create an administrator-level user account with the username “dlink”.
DGS-3600:4#create account admin dlink
Command: create account admin dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3600:4#
config account
Purpose
Used to configure user accounts.
Syntax config account <username>
Description
The config account command configures a user account that has
been created using the create account command.
Parameters
<username>- Enter a name between 1 and 15 alphanumeric
characters to define the administrator account to configure here.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the user password of “dlink” account:
DGS-3600:4#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3600:4#
show account
Purpose Used to display user accounts
Syntax
show account
Description Displays all user accounts created on the Switch. Up to eight user
accounts can exist at one time.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display the accounts that have been created: