Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
359
Command Parameters
config admin local_enable
Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose Used to enable system access authentication policy.
Syntax
enable authen_policy
Description This command will enable an administrator-defined authentication policy for
users trying to access the Switch. When enabled, the device will check the
method list and choose a technique for user authentication upon login.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the system access authentication policy:
DGS-3600:4#enable authen_policy
Command: enable authen_policy
Success.
DGS-3600:4#
disable authen_policy
Purpose Used to disable system access authentication policy.
Syntax
disable authen_policy
Description This command will disable the administrator-defined authentication policy for
users trying to access the Switch. When disabled, the Switch will access the
local user account database for username and password verification. In
addition, the Switch will now accept the local enable password as the
authentication for normal users attempting to access administrator level
privileges.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the system access authentication policy:
DGS-3600:4#disable authen_policy
Command: disable authen_policy
Success.
DGS-3600:4#
show authen_policy
Purpose Used to display the system access authentication policy status on
the Switch.