Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
195
config dhcp pool domain_name
Purpose Used to configure the domain name for the DHCP pool of the Switch.
Syntax
config dhcp pool domain_name<pool_name 12> <domain_name
64>
Description This command is used to configure the domain name for the DHCP
pool of the Switch. This domain name represents a general group of
networks that collectively make up the domain.
Parameters <pool_name 12> - Enter the previously created pool name for which to
add a default router.
<domain_name 64> - The Domain Name may be an alphanumeric
string of up to 64 characters.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the domain name for a DHCP pool:
DGS-3600:4# config dhcp pool domain_name Trinity d_link.com
Command: config dhcp pool domain_name Trinity d_link.com
Success.
DGS-3600:4#
config dhcp pool lease
Purpose Used to configure the lease time of DCHP clients within a DHCP pool.
Syntax
config dhcp pool lease<pool_name 12> [<day 0-365> <hour 0-23>
<minute 0-59> | infinite]
Description Using this command, the user can specify the lease time for the DHCP
client. This time represents the amount of time that the allotted address
is valid on the local network.
Parameters <pool_name 12> - Enter the previously created pool name for which to
set the lease time for accepted DHCP clients.
day 0-365 – Enter the amount of days for the lease. The default setting
is one day.
hour 0-23 – Enter the number of hours for the lease.
minute 0-59 - Enter the number of minutes for the lease.
infinite – Enter this parameter to set the allotted IP address to never be
timed out of its lease.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the lease time for the DHCP pool:
DGS-3600:4# config dhcp pool lease Trinity infinite
Command: config dhcp pool lease Trinity infinite
Success.
DGS-3600:4#