Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
365
config authen_enable
TACACS+ server hosts of the TACACS+ server group list.
! radius – Adding this parameter will require the user to be
authenticated using the RADIUS protocol from the remote
RADIUS server hosts of the RADIUS server group list.
! server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server group
previously configured on the Switch.
! local_enable - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.
! none – Adding this parameter will require no authentication to
access the Switch.
method_list_name – Enter a previously implemented method list name
defined by the user (create authen_enable). The user may add one, or a
combination of up to four of the following authentication methods to this
method list:
! tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.
! xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.
! tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS+ protocol from a remote
TACACS+ server.
! radius - Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a remote
RADIUS server.
! server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server group
previously configured on the Switch.
! local_enable - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch. The local enable password of the device can be
configured using the “config admin local_password”
command.
! none – Adding this parameter will require no authentication to
access the administration level privileges on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Permit” with authentication methods TACACS, XTACACS and local, in that
order.
DGS-3600:4#config authen_enable method_list_name Trinity method tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs xtacacs local
Success.
DGS-3600:4#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order: