Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
33
7
NETWORK MANAGEMENT (SNMP) COMMANDS
The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
The xStack DGS-3600 Switch Series supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. After
enabling SNMP, users can specify which version of SNMP to use to monitor and control the Switch. Three versions of SNMP vary in
the level of security provided between the management station and the network device. The following table lists the security features
of the three SNMP versions:
SNMP
Version
Authentication
Method
Description
v1 Community String
Community String is used for authentication −
NoAuthNoPriv
v2c Community String
Community String is used for authentication −
NoAuthNoPriv
v3 Username
Username is used for authentication − NoAuthNoPriv
v3 MD5 or SHA Authentication is based on the HMAC-MD5 or HMAC-
SHA algorithms − AuthNoPriv
v3 MD5 DES or SHA DES Authentication is based on the HMAC-MD5 or HMAC-
SHA algorithms − AuthPriv.
DES 56-bit encryption is added based on the CBC-DES
(DES-56) standard
The SNMP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
Command Parameters
create snmp user <user_name 32> <groupname 32> {encrypted [by_password auth [md5
<auth_password 8-16 > | sha <auth_password 8-20 >] priv [none | des
<priv_password 8-16>] | by_key auth [md5 <auth_key 32-32>| sha <auth_key
40-40>] priv [none | des <priv_key 32-32>]]}
delete snmp user <user_name 32>
show snmp user
create snmp view <view_name 32> <oid> view_type [included | excluded]
delete snmp view <view_name 32> [all | oid]
show snmp view <view_name 32>
create snmp community <community_string 32> view <view_name 32> [read_only | read_write]
delete snmp community <community_string 32>
show snmp community <community_string 32>
config snmp engineID <snmp_engineID>
show snmp engineID
create snmp group <groupname 32> {v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]}
{read_view <view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
delete snmp group <groupname 32>
show snmp groups
create snmp host <ipaddr> {v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]} <auth_string