Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
304
DGS-3600:4#config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Command: config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Success
DGS-3600:4#
enable dvmrp
Purpose Used to enable DVMRP.
Syntax
enable dvmrp
Description This command, in combination with the disable dvmrp command below,
is used to enable and disable DVMRP on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable DVMRP:
DGS-3600:4#enable dvmrp
Command: enable dvmrp
Success.
DGS-3600:4#
disable dvmrp
Purpose Used to disable DVMRP.
Syntax
disable dvmrp
Description This command is used, in combination with the enable dvmrp command
above, is used to enable and disable DVMRP on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable DVMRP:
DGS-3600:4#disable dvmrp
Command: disable dvmrp
Success.
DGS-3600:4#
show dvmrp routing_table
Purpose Used to display the current DVMRP routing table.
Syntax
show dvmrp routing table [ipaddress <network_address>]
Description The command is used to display the current DVMRP routing table.