Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
21
show greeting_message
Purpose Used to view the currently configured greeting message
configured on the Switch.
Syntax
show greeting_message
Description This command is used to view the currently configured greeting
message on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view the currently configured greeting message:
DGS-3600:4#show greeting_message
Command: show greeting_message
=========================================================================
DGS-3600 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.20.B35
Copyright(C) 2007 D-Link Corporation. All rights reserved.
=========================================================================
Success.
DGS-3600:4#