Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
82
DGS-3600:4#show system_severity
Command: show system_severity
system_severity log : information
system_severity trap : critical
DGS-3600:4#
config log_save_timing
Purpose
Used to configure the method of saving log files to the switch’s flash
memory.
Syntax config log_save_timing [time_interval <min 1-65535> |
on_demand | log_trigger]
Description
The config log_save_timing command allows the user to
configure the time method used in saving log files to the switch’s
flash memory.
Parameters
time_interval <min 1-65535> - Use this parameter to configure the
time interval that will be implemented for saving log files. The log
files will be save every x number of minutes that are configured
here.
on_demand - Users who choose this method will only save log files
when they manually tell the Switch to do so, using the save or save
log command.
log_trigger - Users who choose this method will have log files saved
to the Switch every time a log event occurs on the Switch.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To configure the time interval as every 30 minutes for saving log files:
DGS-3600:4#config log_save_timing time_interval 30
Command: config log_save_timing time_interval 30
Success.
DGS-3600:4#
show log_save_timing
Purpose
Used to display the method configured for saving log files to the
switch’s flash memory.
Syntax show log_save_timing
Description
The show log_save_timing command allows the user to view the
time method configured for saving log files to the switch’s flash
memory.
Parameters
None.
Restrictions
None.
Example usage:
To configure the time interval as every 30 minutes for saving log files: