Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
301
To change the RIP receive mode for the IP interface System:
DGS-3600:4#config rip ipif System rx_mode v1_only
Command: config rip ipif System rx_mode v1_only
Success.
DGS-3600:4#
enable rip
Purpose Used to enable RIP.
Syntax
enable rip
Description This command is used to enable RIP on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To enable RIP:
DGS-3600:4#enable rip
Command: enable rip
Success.
DGS-3600:4#
disable rip
Purpose Used to disable RIP.
Syntax
disable rip
Description This command is used to disable RIP on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable RIP:
DGS-3600:4#disable rip
Command: disable rip
Success.
DGS-3600:4#