Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
355
show wac user
Purpose Used to display the parameters for a previously created Web-based
Access Control user on the Switch.
Syntax
show wac user
Description This command is used to display the parameters for a previously
created Web-based Access Control user on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the parameters for the WAC user:
DGS-3600:4#show wac user
Command: show wac user
Current Accounts:
Username VLAN name
--------------- ----------------
Darren Trinity
Total Entries : 1
DGS-3600:4#
show wac
Purpose Used to display the parameters for the Web-based Access Control
settings currently configured on the Switch.
Syntax
show wac {ports [<portlist> | all]}
Description This command is used to display the parameters for the Web-
based Access Control settings currently configured on the Switch.
Parameters ports <portlist>- Use this parameter to define ports to be viewed
for their Web-based Access Control settings.
all – Use this parameter to display all ports for their Web-based
Access Control settings.
Entering no parameters will display the remaining parameters of
state, authentication method and Web-based Access Control
VLAN currently set on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the WAC parameters