Filter
Top Products
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
49
show snmp traps
Purpose Used to show SNMP trap support on the Switch .
Syntax
show snmp traps
Description This command is used to view the SNMP trap support status
currently configured on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To view the current SNMP trap support:
DGS-3600:4#show snmp traps
Command: show snmp traps
SNMP Traps : Enabled
Authenticate Trap : Enabled
DGS-3600:4#
disable snmp traps
Purpose Used to disable SNMP trap support on the Switch.
Syntax
disable snmp traps
Description This command is used to disable SNMP trap support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To prevent SNMP traps from being sent from the Switch:
DGS-3600:4#disable snmp traps
Command: disable snmp traps
Success.
DGS-3600:4#
disable snmp authenticate traps
Purpose Used to disable SNMP authentication trap support.
Syntax
disable snmp authenticate traps
Description This command is used to disable SNMP authentication support on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable the SNMP authentication trap support: